|
Mountain Series Ovens - Doing It Yourself
Important
Installation Note: Wood Stone uses Hardi
Backer cement board if you order your oven “facade
ready”. Please be advised, that a
layer of Thin Set
or an approved adhesive for high heat
needs to be applied to the backer
board before the facade material,
i.e.; tile, bricks, stone, etc.
#1
Standard Flat Wall Facade Tutorial
This tutorial covers issues related to installing your Wood Stone behind a standard
flat wall which can be covered with many different finish types.
It's the "Do It Yourself" approach in
this tutorial. Please note tutorials 3 & 4 which use
Wood Stone's unique Facade
Extensions.
#2
Corner Installation
Facade Tutorial
(with a Mt. Chuckanut Oven)
This
tutorial covers issues related to installing your
4' Mt. Chuckanut oven behind a wall
in a corner installation which can be covered with many different finish types.
(Note the Mt. Chuckanut has a
different footprint shape than our larger ovens, so some
specifics vary, but the general concept is adaptable).
This is also a "Do It Yourself"
facade. Flat-face doorway and panel/box extensions from Wood Stone's unique
line of Facade
Extensions can be used to simplify your
corner wall facading challenges.
Mountain Series Ovens - Using Facade Extensions (Let Us
Help You)
#3
Flat Wall with Doorway and Storage Box Extensions
This tutorial covers
issues related to installing your Wood Stone into a flat
wall. It also addresses how to facade around a hood
(an often asked question).
Attention Savvy Operators! This
installation has gotten a little help from Wood Stone: It
utilizes our Flat Doorway Facade Extension and
Storage Panel Facade Extension.
#4
Cylinder Wall (Silo) Facade Tutorial
This tutorial covers issues related to installing your Wood Stone inside of a cylinder
or "Silo" wall which can be covered with many different finish types.
Attention Savvy Operators! This
installation has gotten a little help from Wood Stone: It
utilizes our Curved Doorway Facade Extension and a
Curved Lower Panel Facade Extension.
#5
Curved,
Large Radius Wall with Facade Extensions and Hood
This tutorial covers issues
related to installing your Wood Stone oven into a large
radius, curved wall. It also addresses how to facade
around a hood.
This installation has gotten a little
help from Wood Stone: It utilizes our Curved Doorway
Facade Extension and
Curved
Storage Panel Facade Extension.
#6
Arched Wall
Facade Tutorial
This tutorial covers issues related to
installing your Wood Stone oven with an arched facade and a
flat wall.
Attention Savvy Operators! This
installation has gotten a little help from Wood Stone:
It utilizes an Arched Doorway Extension for Flat Wall.
Fire Deck Series Ovens
#7
Fire Deck
Facade Tutorial
This tutorial covers facading the
Wood Stone
rectangular footprint Fire Deck Series
ovens. It's possible to facade the standard unit (S/S
front) on site, or if you know ahead of time a facade will
be built we can offer the unit as "Factory Prepared for
Field Facade" application. Read this tutorial to learn
more about simplifying your Fire Deck installation...
Bistro
Ovens - It's Hip to Be a Square
#8
Bistro 4343
Facade Tutorial
This tutorial covers facading the Wood Stone Bistro 4343 oven. It's
possible to facade the standard unity (S/S front) on site,
or if you know ahead of time a facade will be built then we
can offer the unit as "Factory Prepared for Field Facade"
application. Read this tutorial to learn more about
simplifying your Bistro 4343 installation. |